132
132
Jan 18, 2017
01/17
by
Kimura, Heeday
texts
eye 132
favorite 8
comment 0
Cover title
Topic: Ukulele
Source: removedNEL
81
81
Jan 24, 2017
01/17
by
Kimura, Heeday
texts
eye 81
favorite 5
comment 0
Cover title
Topic: Ukulele
Source: removedNEL
13
13
Apr 1, 2021
04/21
by
Matthew R. Sinclair (3DWorksbyMatt)
data
eye 13
favorite 0
comment 0
This is a Soprano Ukulele Bridge. I will be posting new bridges to this build to spice up your ukulele so please come back any time for updates.
Topics: thingiverse, Art, soprano_ukulele, 3d_printed_ukulele, Ukulele, stl, bridge
Performer: Ukulele Bailey; Webb Hahn Writer: Kahn; Whiting Tenor with Uke. Digitized at 78 revolutions per minute. Four stylii were used to transfer this record. They are 3.8mil truncated conical, 2.3mil truncated conical, 2.8mil truncated conical, 3.3mil truncated conical. The preferred versions suggested by an audio engineer at George Blood, L.P. have been copied to have the more friendly filenames. Matrix number: 1421 B2 Catalog number: 734 Other IDs from the record include: 1421
( 1 reviews )
Topics: 78rpm, Popular Music
Source: 78
4
4.0
Jan 6, 2021
01/21
by
(jeahjeah)
data
eye 4
favorite 0
comment 0
This is just a stand for a Uke so that you can present it as decorative thing :-)
Topics: ukulele, fuß, Other, stl, ukulele stand, standfuß, ukulele standfuß,...
Columbia # 338-D 140449 Eddy Clark "The Ukulele baby" vocal- ukulele accomp. undated
( 1 reviews )
Topics: brrc, 78rpm, Eddy Clark, ukulele
Source: 78
146
146
Jan 18, 2017
01/17
by
Kimura, Heeday
texts
eye 146
favorite 4
comment 0
Cover title
Topic: Ukulele
8
8.0
Apr 18, 2021
04/21
by
Viswa (viswakarma)
data
eye 8
favorite 0
comment 0
Ukulele wall mount. Works nicely for my concert size model. Should fit a soprano also.
Topics: Wall_Hanger, thingiverse, Ukulele, stl, Music, hanger, ukulele_wall_mount
4
4.0
Apr 12, 2021
04/21
by
amelie poyet (amelyW)
data
eye 4
favorite 0
comment 0
Original & exclusive ! Print your one Ukulele with your 3D printer.
Topics: thingiverse, instrument, music, stl, Music, ukulele
7
7.0
Mar 19, 2021
03/21
by
Viswa (viswakarma)
data
eye 7
favorite 0
comment 0
Ukulele strap hanger as seen online. Suitable for a travel Ukulele.
Topics: ukulele_strap, Audio, Ukulele, thingiverse, stl
Performer: ARTHUR GODFREY and his Ukulele Writer: Shand; Matthews Rhythm Band. Digitized at 78 revolutions per minute. Four stylii were used to transfer this record. They are 3.5mil truncated eliptical, 2.3mil truncated conical, 2.8mil truncated conical, 3.3mil truncated conical. These were recorded flat and then also equalized with Turnover: 400.0, Rolloff: -12.0. The preferred versions suggested by an audio engineer at George Blood, L.P. have been copied to have the more friendly filenames....
( 1 reviews )
Topics: 78rpm, Hawaiian
Source: 78
6
6.0
Apr 15, 2021
04/21
by
Luca Gacy (LucaGacy)
data
eye 6
favorite 0
comment 0
13.825in scale base for arduino ukulele
Topics: instrument, musical_instrument, thingiverse, stl, Music, Other, ukulele
5
5.0
Jun 7, 2021
06/21
by
Percy Jacobs (percyjacobs)
data
eye 5
favorite 0
comment 0
Ukulele bridge, nut and saddle. Holes are 3mm diameter. Designed for a soprano ukulele. Printed by my friend Peter at https://www.instagram.com/ingenium3dgt/
Topics: saddle, ukulele_bridge, Ukulele, nut, thingiverse, stl, Music
108
108
Jul 8, 2021
07/21
by
Wood, Alistair, 1977- author
texts
eye 108
favorite 3
comment 0
xv, 312 pages : 24 cm
Topics: Ukulele -- Methods -- Self-instruction, Ukulele -- Instruction and study, Ukulele, MUSIC / Musical...
8
8.0
Mar 17, 2021
03/21
by
Steven Quinn (stevenquinn)
data
eye 8
favorite 0
comment 0
My wife wanted a ukulele stand for her tenor ukulele and loved this design, but it didn't quite fit her ukulele. The bottom gap wasn't quite tall enough and the back was flexing a bit, so the bottom of the ukulele was hitting against the floor. I added some space below and fused the back together to give it more clearance / stability, and then shaped the edges the ukulele sits on a bit to give it more contact points. I also threw in some feet I printed in flexible filament to give it a little...
Topics: tenor_ukulele, Ukulele, stl, music_stand, thingiverse, Music
Performer: ARTHUR GODFREY and his Ukulele Writer: Shand; Matthews Rhythm Ballad. Digitized at 78 revolutions per minute. Four stylii were used to transfer this record. They are 3.5mil truncated eliptical, 2.3mil truncated conical, 2.8mil truncated conical, 3.3mil truncated conical. These were recorded flat and then also equalized with Turnover: 400.0, Rolloff: -12.0. The preferred versions suggested by an audio engineer at George Blood, L.P. have been copied to have the more friendly filenames....
( 1 reviews )
Topics: 78rpm, Ballad
Source: 78
76
76
Jan 18, 2017
01/17
by
Kimura, Heeday
texts
eye 76
favorite 5
comment 0
Cover title
Topic: Ukulele
Source: removedNEL
5
5.0
Mar 15, 2021
03/21
by
Cooper Tribett (coopertribett)
data
eye 5
favorite 0
comment 0
Ukulele stand with a latch to keep it in place. It prints in 4 parts so it doesn't need supports with a latch that slides on and a cap that clips in to keep the latch in place. The design is based off of most guitar stands, and it doesn't take much filament to print. My ukulele is a bit smaller than most, but I made it large enough so it should work with bigger ukulele's as well.
Topics: Music, thingiverse, Ukulele, stl, Ukulele_stand
7
7.0
Mar 17, 2021
03/21
by
Andy Greco (Grecoair)
data
eye 7
favorite 0
comment 0
Ukulele wall mount. Does not hold more than the weight of a ukulele.
Topics: ukulele_mount, Ukulele, ukulele_wall_mount, stl, thingiverse, Music
3
3.0
Mar 31, 2021
03/21
by
Gary Duff (garyduff)
data
eye 3
favorite 0
comment 0
This is a basic and quick to print ukulele holder which does not need any supports for printing. I printed mine at 0.2mm res and 20% infill. There are 2 STL files with slightly different designs for different sized ukulele necks. There is a brace that needs to be printed separately and then glued into the right position to suit your type of ukulele. If you need to widen or narrow the unit this can be done in your slicer by scaling slightly one of the axis. There are 3 holes for fixing to a wall...
Topics: ukulele, thingiverse, guitar holder, guitar, ukulele holder, ukulele stand, Organization, stand, stl
6
6.0
Jan 5, 2021
01/21
by
Corbin Jones (Bamahick)
data
eye 6
favorite 0
comment 0
Ukulele hook that does not require nails or screws. You can hook this on to the top of a cabinet, board, bed, drawers, anything with an edge that juts up. It is a good option if you do not want to damage walls with screws or nails.
Topics: stl, Ukulele, Music, Ukulele Hook, Uke, thingiverse, Ukulele Stand
4
4.0
Mar 19, 2021
03/21
by
Zachary Rubin (GenuineNerd)
data
eye 4
favorite 0
comment 0
This project is a very simple 3D printed Ukulele that I made to get a better understanding of 3D modeling. It isn't very well made, but I hope someone can enjoy it.
Topics: Music, Ukulele, thingiverse, musical_instrument, instrument, stl
6
6.0
Mar 5, 2021
03/21
by
Milena Genserich (mimsalabimsala)
data
eye 6
favorite 0
comment 0
This is an Ukulele hanger I created after some wooden models I saw online
Topics: wall_mount, stl, ukulele_mount, Ukulele, Music, Wall_Hanger, thingiverse
7
7.0
Jan 9, 2021
01/21
by
Marcus Jacobs (Turbojohnny)
data
eye 7
favorite 0
comment 0
So I got this Kala Ukulele from my parents in law and an ukulele strap from my wife. Unfortunately the hook on the strap is made for a wooden ukulele und mine is out of plastic. The soundhole is a little deeper than on an ordinary ukulele. So I just "designed" another hook, tied it up the strap with a piece of fabric and *tada* it worked :D Well it is not pretty but it will do the job. feel free to remix and to adjust so it fits your needs. I printed it in PLA with 50% infill at...
Topics: Music, kala ukulele strap, thingiverse, stl, ukulele strap, kala ukulele, Ukulele
4
4.0
Mar 15, 2021
03/21
by
Akufumi Yamashita (uhmin)
data
eye 4
favorite 0
comment 0
This is an ukulele wall mount. The top surfer design is from "Surfer Palm Trees Clipart" in Openclipart. The two small halls on the hook are designed to put fail-safe-string in case the hook breaks. In fact, my first version (which was printed with a low quality pla filament) was broken and my ukulele was dropped from the wall orz.
Topics: warhammer, Music, thingiverse, ukulele_wall_mount, Ukulele, stl
10
10.0
Jan 18, 2021
01/21
by
Warrick Leigh (wleigh)
data
eye 10
favorite 0
comment 0
This is a wall mount to hold a ukulele. The mount is secured with two nails which are hammered into the 3d printed part at an angle. I used two 1/16 x 1.25in nails to secure the mount. The holes may need to be enlarged with a drill bit if they are too tight. The part took just under 2hrs to print.
Topics: Music, ukulele_wall_mount, thingiverse, Ukulele, stl, ukulele_mount
11
11
Apr 21, 2021
04/21
by
Adrienne Wachtman (awachtman)
data
eye 11
favorite 0
comment 0
i created this project because I am going to Europe this summer and i wanted a ukulele that i could though in a bag to take with me. this is what it turned out to be. The ukulele is already a small instrument but I made it smaller. i made it smaller by putting the head stock in the body of the ukulele. i also made it not a wide. to make it even better i made it an electric ukulele so it is a lot quieter when you are playing in public. This also means that you can plug it into an amp and jam...
Topics: thingiverse, stl, ukulele_music_cool, travel, Music, ukulele, music, electronics
4
4.0
Apr 12, 2021
04/21
by
T.K. GearWalker (GearWalker)
data
eye 4
favorite 0
comment 0
Hand crank strings winder for Ukulele.
Topics: thingiverse, Ukulele, Winder, stl, Music
4
4.0
Apr 1, 2021
04/21
by
Casey Wong (Bananaforscale)
data
eye 4
favorite 0
comment 0
Quick wall mount for a concert ukulele using the small 3M command strips 1.5cmx4cm ones. I used two strips for safety, as each strip was rated to hold 1.5 pounds. Mount should hold up to 3 pounds, so should be good for most ukes. Should be printed with the top of the mount on the plate so you won't need supports and the layer lines will be oriented for max strength.
Topics: thingiverse, 3M_Command_Strips, concert_ukulele, ukulele_wall_mount, Ukulele, Music, stl
10
10.0
Apr 30, 2021
04/21
by
a l (jetlee86)
data
eye 10
favorite 0
comment 0
A modified Ukulele based on Solstie's design here: http://www.thingiverse.com/thing:268090 I trimmed the body and added supports to reduce the print time while maintaining some vertical strength.
Topics: stl, thingiverse, Ukulele, Music
6
6.0
Apr 20, 2021
04/21
by
Jacob Surovsky (sirofsky)
data
eye 6
favorite 0
comment 0
Here's a no supports Ukulele holder to print for your ukulele storing needs! Make sure to print with the flat back on the build plate. If you like my work and would like to see more, go ahead and visit @coolthingsbyjacob on Instagram
Topics: thingiverse, supportless, stl, ukulele_mount, wall_mount, Music, hanger, Ukulele, Wall_Hanger,...
9
9.0
Jan 14, 2021
01/21
by
roee douek (roydouek)
data
eye 9
favorite 0
comment 0
simple ukulele mount screw holes or glue. the hole size is 4 mm works great with my concert ukulele
Topics: Music, thingiverse, stl, ukulele_mount, mount, Ukulele
238
238
Jan 23, 2017
01/17
by
Doane, J. Chalmers
texts
eye 238
favorite 6
comment 0
Topic: Ukulele music
Source: removedNEL
6
6.0
Mar 18, 2021
03/21
by
Voj (pointed)
data
eye 6
favorite 0
comment 0
Wall mount for concert ukulele(100% size) with simple lock (against kids, cats..)
Topics: ukulele_mount, Ukulele, ukulele_wall_mount, stl, lock, thingiverse, holder, Music
10
10.0
Mar 18, 2021
03/21
by
Ken Burres (khbtech)
data
eye 10
favorite 0
comment 0
A ukulele ornament I designed for my daughter. If printed at 100% it measures about 138mm.
Topics: Music, thingiverse, music, ukulele, ornament, stl
8
8.0
Jun 11, 2021
06/21
by
(ElvisExMachina)
data
eye 8
favorite 0
comment 0
Summary I remixed: https://www.thingiverse.com/thing:1367923 to create wider space for geared Ukulele pegs. Grab all of the part at the original creators link. These modified body parts are only if you use geared pegs like these: https://amzn.to/2zTJpqI or https://amzn.to/2Oz734f I also added parts that work with a strap so you can go strapless or add a strap.
Topics: thingiverse, Ukulele, stl
loyaltyfreakmusic.com Artwork "Bloom" by brillianthues on Flickr (CC-By)
Topics: alternative, Ukulele
Performer: Johnny Marvin "The Ukulele Ace" Writer: Henderson and Dixon Vocal. Digitized at 78 revolutions per minute. Four stylii were used to transfer this record. They are 3.8mil truncated conical, 2.3mil truncated conical, 2.8mil truncated conical, 3.3mil truncated conical. These were recorded flat and then also equalized with Turnover: 250.0. The preferred versions suggested by an audio engineer at George Blood, L.P. have been copied to have the more friendly filenames. Matrix...
( 1 reviews )
Topics: 78rpm, Popular Music
Source: 78
7
7.0
Mar 17, 2021
03/21
by
Jaro (siwzet12)
data
eye 7
favorite 0
comment 0
soprano ukulele bridge complete :) scale 1:1
Topics: Music, Ukulele, soprano ukulele, uku bridge, bridge, stl, soprano uku, uku, thingiverse, ukulele...
3
3.0
Jan 15, 2021
01/21
by
Robert Eason (BobEason)
data
eye 3
favorite 0
comment 0
I designed this ukulele wall mount for my wife's ukulele collection. Now things are neatly organized and easily accessible! The keyholes on the back are 50mm, and the print orientation should be with the bottom of the mount printing on the bed (you might need to reorient the .stl) I also used hrabbot's drywall anchors (https://www.thingiverse.com/thing:1288793)
Topics: Music, thingiverse, stl, ukulele_mount, ukulele_wall_mount, Ukulele
283
283
Jan 18, 2017
01/17
by
Ohta, Herb; Beloff, Jim, 1955-
texts
eye 283
favorite 7
comment 0
Melodies with lyrics; includes chord symbols and ukulele chord diagrams
Topics: Ukulele music, Arranged, Popular music
Source: removedNEL
23
23
Jan 13, 2021
01/21
by
Chris Dawson (darknz)
data
eye 23
favorite 0
comment 0
A ukulele capo based on the design by MarkBenson. Prints in two parts and uses a peg spring for tension. **Update**: Now with Fusion 360 file! Fits a ukulele with a neck up to 37mm wide and around 21mm deep (less if using padding). I really liked the design of the ukulele capo by MarkBenson, but after printing it I realised that my peg springs don't fit, so I re-built the design in Fusion 360, changed the allowances for the spring, added some extra thickness around the spring to account for the...
Topics: Music, ukulele, thingiverse, stl, capo
9
9.0
web
eye 9
favorite 0
comment 0
OP-ukulele-orchestra dumped with WikiTeam tools.
Topics: wiki, wikiteam, wikispaces, OP-ukulele-orchestra, op-ukulele-orchestra,...
4
4.0
Mar 25, 2021
03/21
by
Pierre Leducq (pierreleducq)
data
eye 4
favorite 0
comment 0
This is to hang your soprano ukulele against a wall, it must be fixed with 4 mm screws, two screws are enough, but you can use four. Pour suspendre votre ukulele soprano au mur, il doit être fixé avec des vis de 4 mm. Deux vis suffisent, mais vous pouvez en mettre quatre. Infill : 30 % support : off quality : 0.3 à 0.1
Topics: stl, thingiverse, Ukulele, Organization, music, Musique, support
8
8.0
Mar 9, 2021
03/21
by
Ziggystar (Ziggystar)
data
eye 8
favorite 0
comment 0
I recently acquired a ukulele, and, being a guitar player, I knew that humidity (or lack thereof) could damage an instrument. With this in mind, I decided to take a shot at designing a small ukulele humidifier. This should fit any sized-ukulele. It could probably also be used for other acoustic stringed instruments like guitars or basses, but YMMV. Aside from the printed parts, you'll need a small piece of sponge to put inside.
Topics: music, stl, thingiverse, Ukulele, instrument, gadgets, humidifier, Music
3
3.0
Mar 9, 2021
03/21
by
Dupin Lénaïc (gr33n_fr0g)
data
eye 3
favorite 0
comment 0
a Ukulele wall mount
Topics: stl, thingiverse, wall_mount, ukulele_wall_mount, Ukulele, support, Organization
5
5.0
Apr 4, 2021
04/21
by
Mark Benson (markbenson)
data
eye 5
favorite 0
comment 0
This is a Capo for Ukulele based on the Capodastre by hairygael http://www.thingiverse.com/thing:8554 This is a work in progress. I want to add removable string pads so I can Capo two, three or four strings, just by changing the pad.
Topics: thingiverse, Ukulele, Capo, Other, stl
8
8.0
Apr 17, 2021
04/21
by
Chris Footner AMIMechE (ChrisF3D)
data
eye 8
favorite 0
comment 0
I have remixed this from my Acoustic Guitar wall mount (https://www.thingiverse.com/thing:2600335) into a Ukulele wall mount! The gap between the holding arms is 40mm.
Topics: ukulele_mount, Ukulele, thingiverse, stl, Music
8
8.0
Apr 2, 2021
04/21
by
Theron Trowbridge (theron)
data
eye 8
favorite 0
comment 0
I'm designing a DIY ukulele and wanted to try to print the nut and bridge. PLA is hard enough that it might make a good material for it. Design is based on the Stewart Macdonald soprano ukulele kit nut. The OpenSCAD file is parametric and has some attempts at shaping the nut in the traditional manner.
Topics: ukulele, openscad, thingiverse, makerbot, musical_instrument, Other, stl
11
11
Apr 5, 2021
04/21
by
Martin (FigaflorsiBraves)
data
eye 11
favorite 1
comment 0
This is a replacement ukulele bridge for a Harley Benton LP Electric Ukulele. The wooden bridge broke because of low quality. I uploaded 3 versions of the bridge. The first one is modelled after the original part. V3 is a beefier version with an additional fixation hole (as shown in the picture), V4 is the same as V3, but it uses holes instead of the "knot in slot" method for the strings. This was printed with 100% infill and 0.25mm layer height in PLA.
Topics: thingiverse, ukelele, Music, stl, ukulele